Switching power supply

Switching DC/DC converter 75 W max for DIN mounting - SS-75-XXX/DIN

TypeInputOutput
SS-75-050/DIN2_9-18V9-18 V5 VOrder
SS-75-120/DIN2_9-18V9-18 V12 VOrder
SS-75-120/DIN2_18-36V18-36 V12 VOrder
SS-75-120/DIN2_36-72V36-72 V12 VOrder
SS-75-240/DIN2_10-15V10-15 V24 VOrder
SS-75-240/DIN2_18-36V18-36 V24 VOrder
SS-75-240/DIN2_36-72V36- 72 V24 VOrder
SS-75-240/DIN2_85-130V85-140 V24 VOrder
SS-75-480/DIN2_9-18V9-18 V48 VOrder
SS-75-480/DIN2_18-36V18-36 V48 VOrder
If you can't find suitable product, click here - Request for individual solution

Product demand

Switching DC/DC converter 75 W max for DIN mounting

switching DC/DC converter,with galvanic separation, high reliability , precise and stabile parameters, independent from output last.Applicable as power supply of industry, automatisation units and regulation. Can be delivered with input voltage 48 V and 60 V.

Valid by 40 °C, by temperatures from 40 °C to 50 °C lowering of power output linear 2 %/°C.

TECHNICAL PARAMETRES

  • Protection against shortcut, active power limit
  • Optional diode on output
  • Dielectrical strength 4 kV AC input-output
  • Insulation resistance > 50MΩ
  • Internal input fuse

OPERATING CONDITIONS AND DATA

  • Operating temperature  -20° to 50 ° C (reduce power above 40 ° C by -2% / ° C)
  • Humidity (non-condensing) 10 to 90% RH
  • Altitude up to 2000 m above sea level
  • Environment without explosion hazard
  • Degree of protection IP 20 (terminals IP 00)
  • Weight 270 g
  • NORYL 
  • Dimensions 90 x 89 x 62 mm (HxWxD) (5M modulebox)
  • The converter is implemented as a class III device (except for modifications with an input voltage greater than 60V DC).

TECHNICAL STANDARDS AND CERTIFICATES

 

  • SAFETY     ČSN EN 60950-1 ed.2
  • EMC                     ČSN EN 61000-6-1 ed.2
                                  ČSN EN 61000-6-2 ed.2
                                  ČSN EN 61000-6-3 ed.2

WARRANTY 5 YEARS