Switching power supply

DC/DC Converter 36 W (300-1500 V) - SS-36-XXX/DIN_1k5

ProductInput Output Output current Max. res. rippleTolerantion
SS-36-120/DIN_1K5300-1500 V DC12 V DC 2,5 A max.<200 mV(+/-5%)Order
SS-36-240/DIN_1K5300-1500 V DC24 V DC1,5 A max.<200 mV(+/-5%)Order
If you can't find suitable product, click here - Request for individual solution

Product demand

DESCRIPTION

High voltage DC/DC power supply unit with wide input range, designed to supply monitoring devices of photovoltaic power plants directly from the generator strings. Low self-consumption / Safe separation of primary – secondary circuits /  LED operation indication / DIN rail mount.

TECHNICAL PARAMETERS

Input data

  • Input voltage, DC 300-1500 V DC
  • Input current, DC max. 140 mA
  • Reverse polarity protection Yes
  • Input fuse Yes (internal)
  • Input voltage start ramp any slope

Output data

  • Output voltage 24 V DC (+/-5%) or 12 V DC (+/-5%)
  • including line and load regulation
  • Output current 1,5 A max. or 2,5 A max
  • Output power 36 W or 30 W
  • Power derating -2%/°C from 50°C to 60°C ambient temperature.
  • Short-circuit protection Yes (auto resume)
  • Max. residual ripple <200 mV

General data

  • Efficiency max. 86 %
  • Impulse withstand 5,3 kV line to line, 5,3 kV line to case
  • Isolation between primary and secondary > 20 MΩ, 8 kV hi-pot test, double insulation
  • Cooling natural (free air)
  • IP code IP20
  • Weight 270 g
  • Material of enclosure NORYL
  • Dimensions 90 x 88 x 62 mm
  • Class of protection II.
  • Pollution degree 2
  • MTTF 2 500 000 hr. according to IEC61709 (SN29500) @ 25°C
  • RoHS comply Yes

Connection data                               Input                                 Output

  • Number of terminals                4 (++) (--)                           6 (+++---)
  • Cable length, max.                   unrestricted                       <3 m
  • Wire cross-section
  • Solid min/max                          0,5/6 mm2                                       0,5/2,5 mm2                                                   
  • Flexible min/max                      0,5/4 mm2                           0,5/2,5 mm2                                                  
  • Tightening torque, min/max     0,5/0,6 Nm                          0,5/0,6 Nm

Signal indication

  • Device working                             LED green

Environmental conditions

  • Operating temperature -20 .. 60ºC
  • Relative humidity (non-condensing) 5% to 90%
  • Installation altitude < 2000 m above sea level

 

TECHNICAL STANDARDS
Safety

  • EN/IEC 61204-7 ed1.0

EMC

  • EN 61000-4-2: criterion B, kond. +- 4kV, air +-8kV
  • EN/IEC 61204-3 ed2.0
  • EN 61000-4-3: criterion A, 80-1000MHz 10V/m AM80%, 900MHz/200Hz 10V/m 50%
  • EN 61000-4-4: criterion B, input only +-2kV 5/50ns
  • EN 61000-4-5 ed.2: criterion B, input only, 5,3 kV line to line, 5,3 kV line to case
  • EN 61000-4-6 ed.3: criterion A,input only, 0,15-80MHz 10Vrms 80% (opt. 9-150kHz 20Vrms),
  • EN 55011 ed.3: class A

Mechanical

  • Topple and vibration: tables 13 and 14 of EN 50178:1997

Limited warranty 3 years

PACKING AND STORAGE
Product is supplied individually packaged in paper box, users guide for each piece is included.
Storage temperature -25 to 80ºC, relative humidity < 90% (not condensing). It is prohibited to expose product to a mechanical shocks and injurious gases.